AV & ITLearn more >AV & IT
The CCT60F is a CAT6 installation networking cable featuring a Flamoflex™ outer jacket compliant to the IEC 60332-1 standard regarding fire and flammability resistance in public installations. The Flamoflex™ material is specifically designed with installers convenience in mind, offering a smooth and durable outer jacket for easy installation and pulling. The conductor section of the CCT60F consists of 4 pair with stranded 23 AWG conductors with a plastic + shaped separator in between them. Thanks to this plastic separator, better performance in terms of crosstalk and system noise can be achieved resulting in a higher bandwidth. The conductor section is surrounded by an overall aluminum foil shielding with drain wire. This offers improved immunity against noise and interference caused by external devices. Supports 10Base-T, 100Base-TX, 1000Base-T and 10GBase-T gigabit.
| Application | AV & IT |
| Series | Contractor Series |
| Inner conductor | Insulation | Material | PE 1.14 mm (Ø) |
| Colours | Green / White & Green ; Blue / White & Blue ; Orange / White & Orange ; Brown / White & Brown | ||
| Overall shielding | Aluminium foil | Al-mylar, 100% coverage - 25% Overlap | |
| Drain wire | TC 1 x 0.4 mm (Ø) (OFC) | ||
| Outer jacket | Material | NHFR 7.2 mm (Ø) | |
| Colours | Black | ||
| Type of cable | F/UTP CAT6 Networking cable | ||
| Inner conductor | Material | BC 1 x 0.566 mm (Ø) (OFC) | |
| Section | 0.00039 “² | ||
| Separator | None | ||
| Inner conductor | American Wire Gauge | 23 AWG | |
| Number of conductors | 8 (4 pairs) | ||
| Conductor twisting | Lay length ≤ 30 mm | ||
| RoHS2 compliant | According EU Directive 2011/65/EU |
| Reach compliant | According EC 1907/2006 |
| Flammability test | According IEC 60332-1 |
| Indoor / outdoor | Indoor |
| Circuit integrity | n/a |
| Smoke emissions | According IEC 61034 |
| Zero halogen compounds | According EN 50267-2-1 |
| IEC 60754 | |
| Cabling standard | ANSI TIA-EIA 568B |
| Temperature range | Fixed installation | - 68 °F till + 167 °F |
| Mobile installation | - 59 °F till + 140 °F | |
| Bending radius | Fixed installation | 4 x outer diameter |
| Mobile installation | 6 x outer diameter |
| Max. conductor | DC resistance | 93.8 (Ω / Km) |
| DC resistance unbalanced | 5 % | |
| Dielectric strength | 1.5 (KV / 1 min. DC) | |
| Max. Delay / Skew | 45 (ns / 3937.0079 ") | |
| Rated voltage | 300 V | |
| Nom. Velocity of propagation | 66 % | |
| Characteristic impedance | 100 Ω ± 15 Ω | |
| Nom. mutual capacitance | ≤ 5.6 (nF / 100 m) | |
| Pair to ground capacitance unbalance | ≤ 160 (nF / 100 m) | |
The outer jacket of all PROCAB cables complying to IEC60332 will extinguish itself when that cable is briefly exposed to a small flame.
LSHF stands for Low Smoke, Halogen Free. This term refers to Halogen free flame retardant thermoplastic material used as a sheathing compound in cables. In the event of a fire or when exposed to high levels of heat, the chemicals in the jacket removes heat from the flame, whilst the reaction produces water as a by-product to help quench the flame. As a result, the cable will emit very low levels of smoke, and non-toxic levels of poisonous halogen gasses.
For ease of installation these bulk cables are provided with an indication on every meter of the cable. This enables installers to have a clear and efficient indication of how many meters they still have available on their reel.
CAT6 can handle a 10 gigabit network (10000Mbps at 250Mhz). This cable can bridge distances up to 100 meters.
The 100Ω cables are ideal for the transmission of digital signals. This impedance is mostly used in our wide range of UTP cables.
The signal cables consist of a solid inner conductor. Typically, you will find solid core wires in situations where the wire is not designed to be continuously flexed and where the wire may be exposed to corrosive elements or adverse weather condition. A solid copper core can achieve an even more compact diameter than a stranded wire with the same current carrying capability.
Aluminum foil shielding is ideal for reflecting electromagnetic interference (EMI) and is often used in combination with a braided wire to absorb EMI.
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, ...
We are glad you are interested in our solutions. For a personalised quote for this product, please contact our sales department or make an appointment with one of our global sales representatives.
Request a quote
Rental & MI
