1 meter sample pack of the PAC251. The PAC251 is a hybrid power/audio cable which consists of 3 x 2,5mm² power section and a 2 x 0.22mm² 110 Ohm signal pair, this makes it ideal for rental applications. The signal pair can be used for analog audio, digital audio or DMX. The power and signal cable each have a separate jacket which makes it easy to split out the cables at the end.
|Application||AV & IT|
|Rental & MI|
|Series||Bulk & Accessories|
|Outer jacket||Material||PVC 17.5 mm (Ø)|
|Inner conductor||Audio||Insulation||Material||PE 1.55 mm (Ø)|
|Inner jacket||Material||PVC 5 mm (Ø)|
|PVC 10 mm (Ø)|
|Inner conductor||Power||Insulation||Material||PVC 3.7 mm (Ø)|
|Audio||Insulation||Colours||Red / Blue|
|Shielding||Drain wire||TC 7 x 0.2 mm (Ø) (OFC)|
|Power||Insulation||Colours||Blue / Brown / Yellow & Green|
|Inner conductor||Material||BC 48 x 0.25 mm (Ø) (OFC)|
|Type of cable||Power & 1 x DMX-AES 110 Ω cable|
|Inner conductor||Power||Section||2.5 mm²|
|Audio||Material||TC 7 x 0.2 mm (Ø) (OFC)|
|Power||American Wire Gauge||13 AWG|
|Audio||American Wire Gauge||24 AWG|
|Power||Number of conductors||3|
|Audio||Number of conductors||2|
|Max. conductor||DC resistance||85 (Ω / Km)|
|7.98 (Ω / Km)|
|Max. operation voltage||Power||500 V|
|Characteristic impedance||110 Ω|
The flexible and solid PVC outer jacket makes it the perfect cable for many kinds of applications. The smooth outer jacket provides great and easy pulling capabilities to guide the cable through a truss or around a corner while still offering perfect rolling and unrolling performance for highly demanding mobile applications.
Tin is a useful plating for copper because it not only helps to boost copper’s properties, it also helps the wire to last much longer and counter acts against oxidation. Tin also helps to strengthen the copper wire, making it more resilient to breakage or lost connections, at the same time boosting the coppers conductivity.
Aluminum foil shielding is ideal for reflecting electromagnetic interference (EMI) and is often used in combination with a braided wire to absorb EMI.
Bare copper spiral is even more flexible than a braided shielding. This type of shield is constructed by wrapping the shield material in one direction around the conductors. Spiral shields are most effective in the use of cable where audio signals are transmitted.
Tinned copper braid shielding provides superior physical protection, while maintaining good flexibility and flex life. These shields are the ideal choice for minimizing interference and have lower dc resistance than foil. The tin plating also adds to the copper in the cable as it not only helps to boost the copper’s properties, it also helps the wire to last much longer and counter acts against oxidation.
The drain wire is a part of a shield within a cable that reduces the resistance from any point on the shield to ground. A drain wire carries extraneous electrical noise to ground and away from the circuit or system. The tin plating also adds to the copper in the cable as it not only helps to boost the copper’s properties, it also helps the wire to last much longer and counter acts against oxidation.
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, ...