The PCX160 is an RG6/U coaxial video cable specifically designed for digital SDI, HD-SDI and 3G-SDI video transmissions in mobile applications. Its Highflex™ PVC outer jacket in combination with other high-grade materials guarantee a great flexibility, long service life span and accurate signal transmission under all circumstances. The conductor section of 19 AWG is constructed using 7 strands of high purity copper with a thickness of 0,345 mm, resulting in an overall section of 0,65 mm² surrounded by a foamed polyethylene isolator. The dual braided overall shielding consists of two individual layers with a coverage percentage of 95%, guaranteeing the best possible immunity against noise and interference. Compatible with Neutrik NBNC75BRU11.
|PCX160/1||100 m plastic reel|
|Application||Rental & MI|
|Series||Bulk & Accessories|
|Type of cable||75 Ω coaxial video cable|
|Inner conductor||Material||BC 7 x 0.345 mm (Ø) (OFC)|
|Number of conductors||1|
|Insulation||Material||FPE 4.6 mm (Ø)|
|American Wire Gauge||19 AWG|
|Overall shielding||Braiding||TC 16 x 9 x 0.12 mm (Ø) (OFC)|
|Outer jacket||Material||PVC 7 mm (Ø)|
|RoHS2 compliant||According EU Directive 2011/65/EU|
|Reach compliant||According EC 1907/2006|
|Flammability test||According IEC 60332-1|
|Indoor / outdoor||UV resistant (UL1581, UVA, 720 h)|
|Smoke emissions||According IEC 61034|
|Zero halogen compounds||According EN 50267-2-1|
|Temperature range||Fixed installation||- 20 °C till + 80 °C|
|Mobile installation||- 15 °C till + 60 °C|
|Bending radius||Fixed installation||8 x outer diameter|
|Mobile installation||10 x outer diameter|
|Max. conductor||DC resistance||27.4 (Ω / Km)|
|Dielectric strength||1.5 (KV / 1 min. DC)|
|Rated voltage||300 V|
|Nom. Velocity of propagation||81 %|
|Characteristic impedance||75 Ω ± 3 Ω|
|Conductor to shield Nom. Capacitance||53 (pF/m)|
|Nom. Delay||4.1 ns/m|
|Nom. shield DC resistance||9 (Ω / Km)|
For ease of installation these bulk cables are provided with an indication on every meter of the cable. This enables installers to have a clear and efficient indication of how many meters they still have available on their reel.
Coax cables with a 75Ω impedance are highly suitable for transmitting video signals. The cables have an advantage in flexibility and low loss characteristics.
A dual layer of tinned copper braid shielding provides superior physical protection and high coverage, while maintaining good flexibility and flex life. These shields are best for minimizing interference at all frequencies and have lower dc resistance than foil. The tin plating also adds to the copper in the cable as it not only helps to boost the copper’s properties, it also helps the wire to last much longer and counter acts against oxidation.
The flexible and solid PVC outer jacket makes it the perfect cable for many kinds of applications. The smooth outer jacket provides great and easy pulling capabilities to guide the cable through a truss or around a corner while still offering perfect rolling and unrolling performance for highly demanding mobile applications.
The HD-SDI signal cables offer a transmission speed up to 1.5 Gb/s and can be used for resolutions up to 720p and 1080i.
The 3G-SDI signal cables offer a transmission speed up to 3.0 Gb/s and can be used for resolutions up to 1080p at 60 frames per second.
A stranded copper wire is more flexible and easier to install than a large single-strand wire with the same cross section. Stranding improves wire life in applications where flexibility is needed. A particular cross section of a stranded conductor gives it essentially the same resistance characteristics as a single-strand conductor, but with added flexibility.
The SD-SDI signal cables offer a transmission speed up to 360Mb/s and can be used for resolutions up to 480i and 576i.