BCT65S
Networking cable - CAT6A - S/FTP - flex 0.22 mm² - 24 AWG HighFlex™
Rental & MI
- Highflex™ solid & flexible jacket
- 24 AWG thin and dense stranded conductors
- 0.34 " (Ø) outer diameter
- Double shielding (Al-foil + Braiding)
Rental & MI
The BCT65S is a CAT6A networking cable featuring a Highflex™ outer jacket which is specifically designed for professional use in highly demanding applications. The conductor section of the BCT65S consists of 4 pairs with solid 24 AWG conductors which are individually shielded by an aluminum foil while the entire section is surrounded by an overall braiding. Due to the double shielding, better performance in terms of crosstalk and system noise is achieved resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. The combination with hard and solid inner jacket materials and soft outer jacket materials provides great flexibility with a solid touch. Even after numerous times of winding and unwinding. Supports 10Base-T, 100Base-TX, 1000Base-T and 10GBase-T gigabit.
| BCT65S/1 | 100 m wooden reel |
| BCT65S/3 | 300 m wooden reel |
| Application | Rental & MI |
| Series | Bulk & Accessories |
| Inner conductor | Insulation | Material | Foamed PE 1.32 mm Ø |
| Colours | Green / White & Green ; Blue / White & Blue ; Orange / White & Orange ; Brown / White & Brown | ||
| Shielding | Aluminium foil | Al-mylar, 100% coverage - 25% Overlap | |
| Overall shielding | Braiding | TC 10 x 12 x 0.08 mm (Ø) (OFC) | |
| Inner jacket | Material | Hard PVC | |
| Outer jacket | Material | Soft PVC 8.7 mm (Ø) | |
| Colours | Black | ||
| Type of cable | S/FTP CAT6A Networking cable | ||
| Inner conductor | Material | BC 7 x 0.20 mm (Ø) (OFC) | |
| Section | 0.00034 “² | ||
| Separator | Non woven foil | ||
| Inner conductor | American Wire Gauge | 24 AWG | |
| Number of conductors | 8 (4 pairs) | ||
| Conductor twisting | Lay length ≤ 30 mm | ||
| RoHS2 compliant | According EU Directive 2011/65/EU |
| Reach compliant | According EC 1907/2006 |
| Flammability test | According IEC 60332-1 |
| Indoor / outdoor | Indoor |
| Cabling standard | ISO/IEC11801 |
| IEC61156 | |
| UL444 | |
| ANSI TIA-EIA 568C.2 |
| Temperature range | Fixed installation | - 68 °F till + 167 °F |
| Mobile installation | - 59 °F till + 140 °F | |
| Bending radius | Fixed installation | 10 x outer diameter |
| Mobile installation | 12 x outer diameter |
| Max. conductor | DC resistance | 95 (Ω / Km) |
| DC resistance unbalanced | 2 % | |
| Dielectric strength | 1.5 (KV / 1 min. DC) | |
| Max. Delay / Skew | 25 (ns / 3937.0079 ") | |
| Rated voltage | 72 V | |
| Nom. Velocity of propagation | 74 % | |
| Characteristic impedance | 100 Ω ± 15 Ω | |
| Nom. mutual capacitance | ≤ 5.6 (nF / 100 m) | |
| Pair to ground capacitance unbalance | ≤ 160 (nF / 100 m) | |
The outer jacket of all PROCAB cables complying to IEC60332 will extinguish itself when that cable is briefly exposed to a small flame.
For ease of installation these bulk cables are provided with an indication on every meter of the cable. This enables installers to have a clear and efficient indication of how many meters they still have available on their reel.
The combination of a hard and solid inner jacket and a soft outer jacket provides great flexibility with a solid touch, even after numerous times of winding and unwinding.
The flexible and solid PVC outer jacket makes it the perfect cable for many kinds of applications. The smooth outer jacket provides great and easy pulling capabilities to guide the cable through a truss or around a corner while still offering perfect rolling and unrolling performance for highly demanding mobile applications.
CAT6A can handle a 10 gigabit network (10000Mbps at 500Mhz). This cable can bridge distances up to 100 meters.
The 100Ω cables are ideal for the transmission of digital signals. This impedance is mostly used in our wide range of UTP cables.
Tinned copper braid shielding provides superior physical protection, while maintaining good flexibility and flex life. These shields are the ideal choice for minimizing interference and have lower dc resistance than foil. The tin plating also adds to the copper in the cable as it not only helps to boost the copper’s properties, it also helps the wire to last much longer and counter acts against oxidation.
Aluminum foil shielding is ideal for reflecting electromagnetic interference (EMI) and is often used in combination with a braided wire to absorb EMI.
A stranded copper wire is more flexible and easier to install than a large single-strand wire with the same cross section. Stranding improves wire life in applications where flexibility is needed. A particular cross section of a stranded conductor gives it essentially the same resistance characteristics as a single-strand conductor, but with added flexibility.
CAT5E can handle a gigabit Ethernet network (1000Mbps at 100Mhz) and is designed to reduce crosstalk better that CAT5.
CAT6 can handle a 10 gigabit network (10000Mbps at 250Mhz). This cable can bridge distances up to 100 meters.
Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, ...
We are glad you are interested in our solutions. For a personalised quote for this product, please contact our sales department or make an appointment with one of our global sales representatives.
Request a quote
AV & ITLearn more >
