BCT65S

Networking cable - CAT6A - S/FTP - flex 0.22 mm² - 24 AWG HighFlex™
Rental & MI
Bulk & Accessories
  • 24 AWG thin and dense stranded conductors
  • Double shielding (Al-foil + Braiding)
  • Highflex™ solid & flexible jacket
  • 0.34 " (Ø) outer diameter
HD Base T Compliant
Shielded
Bi-Jacketed
CAT6 500 MHz
Meter Indicator
IEC-60332
Where to buy?

Description

The BCT65S is a CAT6A networking cable featuring a Highflex™ outer jacket which is specifically designed for professional use in highly demanding applications. The conductor section of the BCT65S consists of 4 pairs with solid 24 AWG conductors which are individually shielded by an aluminum foil while the entire section is surrounded by an overall braiding. Due to the double shielding, better performance in terms of crosstalk and system noise is achieved resulting in a higher bandwidth and improved immunity against noise and interference caused by external devices. The combination with hard and solid inner jacket materials and soft outer jacket materials provides great flexibility with a solid touch. Even after numerous times of winding and unwinding. Supports 10Base-T, 100Base-TX, 1000Base-T and 10GBase-T gigabit.

Product variants

Available now

BCT65S/1 100 m wooden reel
BCT65S/3 300 m wooden reel

Specifications

Product features

Application Rental & MI
Series Bulk & Accessories

Physical characteristics

Inner conductor Insulation Material Foamed PE 1.32 mm Ø
Colours Green / White & Green ; Blue / White & Blue ; Orange / White & Orange ; Brown / White & Brown
Shielding Aluminium foil Al-mylar, 100% coverage - 25% Overlap
Overall shielding Braiding TC 10 x 12 x 0.08 mm (Ø) (OFC)
Inner jacket Material Hard PVC
Outer jacket Material Soft PVC 8.7 mm (Ø)
Colours Black
Type of cable S/FTP CAT6A Networking cable
Inner conductor Material BC 7 x 0.20 mm (Ø) (OFC)
Section 0.00034 “²
Separator Non woven foil
Inner conductor American Wire Gauge 24 AWG
Number of conductors 8 (4 pairs)
Conductor twisting Lay length ≤ 30 mm

Standards and regulations

RoHS2 compliant According EU Directive 2011/65/EU
Reach compliant According EC 1907/2006
Flammability test According IEC 60332-1
Indoor / outdoor Indoor
Cabling standard ISO/IEC11801
IEC61156
UL444
ANSI TIA-EIA 568C.2

Mechanical characteristics

Temperature range Fixed installation - 68 °F till + 167 °F
Mobile installation - 59 °F till + 140 °F
Bending radius Fixed installation 10 x outer diameter
Mobile installation 12 x outer diameter

Electrical characteristics

Max. conductor DC resistance 95 (Ω / Km)
DC resistance unbalanced 2 %
Dielectric strength 1.5 (KV / 1 min. DC)
Max. Delay / Skew 25 (ns / 3937.0079 ")
Rated voltage 72 V
Nom. Velocity of propagation 74 %
Characteristic impedance 100 Ω ± 15 Ω
Nom. mutual capacitance ≤ 5.6 (nF / 100 m)
Pair to ground capacitance unbalance ≤ 160 (nF / 100 m)

Cross section

Technology

Cable properties

IEC60332

The outer jacket of all PROCAB cables complying to IEC60332 will extinguish itself when that cable is briefly exposed to a small flame.  

Meter indicator

For ease of installation these bulk cables are provided with an indication on every meter of the cable. This enables installers to have a clear and efficient indication of how many meters they still have available on their reel.

Bi-jacketed

The combination of a hard and solid inner jacket and a soft outer jacket provides great flexibility with a solid touch, even after numerous times of winding and unwinding.

Highflex™

The flexible and solid PVC outer jacket makes it the perfect cable for many kinds of applications. The smooth outer jacket provides great and easy pulling capabilities to guide the cable through a truss or around a corner while still offering perfect rolling and unrolling performance for highly demanding mobile applications.

CAT6A

CAT6A can handle a 10 gigabit network (10000Mbps at 500Mhz). This cable can bridge distances up to 100 meters.

100 Ohm

The 100Ω cables are ideal for the transmission of digital signals. This impedance is mostly used in our wide range of UTP cables.

Tinned copper braiding

Tinned copper braid shielding provides superior physical protection, while maintaining good flexibility and flex life. These shields are the ideal choice for minimizing interference and have lower dc resistance than foil. The tin plating also adds to the copper in the cable as it not only helps to boost the copper’s properties, it also helps the wire to last much longer and counter acts against oxidation.

Aluminum Foil

Aluminum foil shielding is ideal for reflecting electromagnetic interference (EMI) and is often used in combination with a braided wire to absorb EMI.

Stranded copper

A stranded copper wire is more flexible and easier to install than a large single-strand wire with the same cross section. Stranding improves wire life in applications where flexibility is needed. A particular cross section of a stranded conductor gives it essentially the same resistance characteristics as a single-strand conductor, but with added flexibility.

CAT5E

CAT5E can handle a gigabit Ethernet network (1000Mbps at 100Mhz) and is designed to reduce crosstalk better that CAT5.

CAT6

CAT6 can handle a 10 gigabit network (10000Mbps at 250Mhz). This cable can bridge distances up to 100 meters.

Downloads

Information sheet English

Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, ...

  • download Product information sheet - EN

Certificates

Get in touch

We are glad you are interested in our solutions. For a personalised quote for this product, please contact our sales department or make an appointment with one of our global sales representatives.

Request a quote
Top