BSD550UX

Networking cross cable - CAT5E - U/UTP - RJ45 - LSHF
AV & IT
Connect Series
  • Flexible PVC jacket
  • 26 AWG stranded conductors
  • LSHF jacket
  • 5.3 mm (Ø) outer diameter
  • Oxygen free copper
Impedance 100 Ohm LSHF CAT5E 100 MHz Gold Plated
Where to buy?

Description

The BSD550UX is a basic series CAT5E U/UTP networking cross cable, offering reliable interconnections between two network devices. Both ends are terminated by a red male RJ45 connector with gold plated contacts. The conductor section consists of 4 pairs stranded 26 AWG conductors guaranteeing an optimal signal transmission. The low-smoke & halogen free jacket material allows usage in installations in public and other demanding buildings. Supports 10Base-T, 100Base-TX and 1000Base-T gigabit networks. Supports Dante, Cobranet, Ethersound, HdbaseT and other AV network protocols

Product variants

Available now

BSD550UX/1.5 1.5 meter

Specifications

Product features

Application AV & IT
Series Connect Series

Physical characteristics

Inner conductor Insulation Material HDPE 0.92 mm (Ø)
Colours Green / White & Green ; Blue / White & Blue ; Orange / White & Orange ; Brown / White & Brown
Outer jacket Colours Black
Material LSHF 5.3 mm (Ø)
Type of cable U/UTP CAT5E Networking cable
Inner conductor Material BC 7 x 0.16 mm (Ø) (OFC)
Section 0.14 mm²
American Wire Gauge 26 AWG
Conductor twisting Lay length ≤ 30 mm
Connection type RJ45 male to RJ45 male

Standards and regulations

RoHS2 compliant According EU Directive 2011/65/EU
Reach compliant According EC 1907/2006
Flammability test According IEC 60332-1
Indoor / outdoor Indoor
Circuit integrity n/a
Smoke emissions According IEC 61034
Zero halogen compounds According EN 50267-2-1
IEC 60754
Cabling standard ANSI TIA-EIA 568B

Mechanical characteristics

Temperature range Fixed installation - 20 °C till + 75 °C
Mobile installation - 15 °C till + 60 °C
Bending radius Fixed installation 4 x outer diameter
Mobile installation 6 x outer diameter

Electrical characteristics

Max. conductor DC resistance 130 (Ω / Km)
DC resistance unbalanced 5 %
Dielectric strength 1.5 (KV / 1 min. DC)
Max. Delay / Skew 45 (ns / 100 m)
Rated voltage 72 V
Nom. Velocity of propagation 65 %
Characteristic impedance 100 Ω ± 10 Ω
Nom. mutual capacitance ≤ 5.6 (nF / 100 m)
Pair to ground capacitance unbalance ≤ 330 (nF / 100 m)

Technology

Cable properties

100 Ohm

The 100Ω cables are ideal for the transmission of digital signals. This impedance is mostly used in our wide range of UTP cables.

LSHF

LSHF stands for Low Smoke, Halogen Free. This term refers to Halogen free flame retardant thermoplastic material used as a sheathing compound in cables. In the event of a fire or when exposed to high levels of heat, the chemicals in the jacket removes heat from the flame, whilst the reaction produces water as a by-product to help quench the flame.  As a result, the cable will emit very low levels of smoke, and non-toxic levels of poisonous halogen gasses.

CAT5E

CAT5E can handle a gigabit Ethernet network (1000Mbps at 100Mhz) and is designed to reduce crosstalk better that CAT5.

Gold plated

The connectors that are fitted with gold plated contacts have the advantage of preventing oxidation and maintain performance after years of use. Another great property of gold is that it is an excellent electrical conductor. For comparison, if pure copper has a relative conductivity of 100 then gold is only 31% lower than copper, while nickel is 76% lower than copper.

Downloads

Information sheet English

Create a document that summarizes all the details of this product. The product information sheet can contain: product descriptions, technical drawings, technical specifications, ...

Certificates

Get in touch

We are glad you are interested in our solutions. For a personalised quote for this product, please contact our sales department or make an appointment with one of our global sales representatives.

Request a quote
Top